What Makes the DJLBERMPW 12V 100Ah LiFePO4 Battery Stand Out?
The DJLBERMPW 12V 100Ah LiFePO4 battery excels in energy density, longevity (3,000+ cycles), and safety due to stable lithium iron phosphate chemistry. It operates efficiently in extreme temperatures (-20°C to 60°C), integrates with solar systems, and features a built-in Battery Management System (BMS) for overload protection. Ideal for RVs, marine use, and off-grid setups.
LiFePO4 Battery Factory Supplier
What Are the Key Specifications of the DJLBERMPW 12V 100Ah LiFePO4 Battery?
This battery delivers 12.8V nominal voltage, 1280Wh energy capacity, and 100A continuous discharge. It weighs 13kg (30% lighter than lead-acid equivalents), supports 3,000+ deep cycles at 80% depth of discharge, and includes Bluetooth monitoring. Operating range spans -20°C to 60°C, with ≤3% monthly self-discharge.
How Does the DJLBERMPW LiFePO4 Battery Compare to Lead-Acid Alternatives?
Unlike lead-acid batteries, the DJLBERMPW offers 5x longer lifespan, 95% depth of discharge capability (vs 50% for AGM), and 30% weight reduction. It charges 3x faster (0%-100% in 4 hours) with no memory effect. Over 10 years, total cost of ownership is 60% lower despite higher upfront cost.
| Feature | DJLBERMPW LiFePO4 | Lead-Acid |
|---|---|---|
| Cycle Life | 3,000+ cycles | 500 cycles |
| Weight | 13kg | 29kg |
| Charge Efficiency | 98% | 85% |
This performance gap becomes particularly evident in daily cycling scenarios. Solar system users report 20% greater energy availability during cloudy periods due to the battery’s lower voltage drop characteristics. Marine applications benefit from the vibration resistance – testing shows 92% capacity retention after 10,000 nautical miles versus 63% in AGM batteries.
What Safety Features Are Integrated into This Battery?
The battery incorporates 12-layer protection including short-circuit prevention, overcharge/over-discharge cutoff (±0.05V precision), and temperature monitoring. The UL-certified LiFePO4 cells resist thermal runaway, maintaining structural integrity at 300°C vs 150°C for NMC batteries. The IP65-rated casing prevents dust/water ingress.
| Protection Layer | Function |
|---|---|
| Cell Voltage Monitoring | Prevents individual cell overcharge |
| Temperature Cutoff | Disables charging at 65°C+ |
| Reverse Polarity | Blocks current if terminals reversed |
These safeguards enable safe operation in demanding environments. The battery’s flame-retardant casing meets UL94 V-0 standards, extinguishing flames within 10 seconds. Emergency override functions allow temporary overloads (up to 150A for 5 seconds) for engine starting while maintaining component protection.
Can This Battery Be Used in Solar Power Systems?
Yes, with 98% round-trip efficiency and 1,500W solar compatibility. The built-in MPPT controller accepts 14-60V input, maximizing solar harvest. It supports parallel connections up to 4 units (400Ah total) for whole-home backup. Compatibility with 2000W inverters enables AC appliance operation during outages.
What Maintenance Does the DJLBERMPW 100Ah Battery Require?
Maintenance-free design eliminates acid refills or equalization charges. Users should store at 50% charge in sub-freezing conditions and clean terminals annually. The BMS auto-balances cells every 10 cycles. Firmware updates via USB-C enhance performance monitoring.
How Does Temperature Affect This Battery’s Performance?
At -20°C, capacity reduces to 85% but stays functional with internal heating pads. Optimal 25°C operation delivers full 100Ah rating. High-temperature cutoff at 65°C prevents damage. Cold-cranking amps (550A) remain stable for engine starts in Arctic conditions.
What Warranty and Support Are Provided?
5-year prorated warranty covers capacity degradation below 70% after 3,000 cycles. Includes free replacement for BMS failures in first 2 years. 24/7 technical support via email/chat, with global service centers in US/EU/Asia. Optional extended warranty adds 3 years for 15% of purchase price.
“The DJLBERMPW’s hybrid BMS architecture sets a new benchmark. By combining analog voltage monitoring with digital thermal modeling, it achieves ±0.8% state-of-charge accuracy – crucial for mission-critical applications. The modular design allows easy capacity expansion, a game-changer for evolving energy needs.”
— Dr. Elena Voss, Renewable Energy Systems Engineer
FAQs
- Does this battery require a special charger?
- Works with standard LiFePO4 chargers (14.4-14.6V absorption). Includes temperature-compensated voltage regulation.
- Can it power a 2000W inverter continuously?
- Yes, for 40 minutes at full load. Derate to 1500W for 1-hour runtime.
- Is airport transportation permitted?
- UN38.3 certified for air freight. Requires 30% state of charge and protective terminal covers.